Call us on 01634 729 690
How to view and reset Maintenance Alarms
Before You Begin
- Ensure the 5-inch HMI display is powered and accessible.
- Be ready to review the active alarm list and run hours.
- Complete the required maintenance before attempting the reset.
- Have the site maintenance log available for recording the action.
Quick Overview
- Open the Alarms Browser on the HMI.
- Review the maintenance alarm details and equipment run hours.
- Carry out the required maintenance.
- Use Maintenance Alarm Reset and confirm the alarm clears.
Keep This Guide On Hand
This guide explains how to use the 5-inch Trend HMI display to locate, review and reset maintenance alarms once servicing has been completed. It supports proper scheduled maintenance and correct timer reset practice.
Video guide | 4 minutes 19 Seconds | Booklet included
Written Guide Overview
This written summary mirrors the booklet and gives users a quick reference to the key steps show in the video.
|
1
|
Access the HMI display and open the Alarms Browser to identify the maintenance alarm and the affected component. |
|
2
|
Review the run hours and alarm details, then complete the required maintenance work on the equipment. |
|
3
|
Return to the HMI, open the Views Browser, and select Maintenance Alarm Reset to reset the timer . |
|
4
|
Go back to the alarms screen and confirm the maintenance alarm has cleared and the system is operating normally. |
What this guide covers
- Accessing the HMI display.
- Navigating to the Alarms Browser.
- Reviewing Fan Maintenance alarm details.
- Carrying out required maintenance before reset.
- Using Maintenance Alarm Reset in the Views Browser.
- Verifying alarm clearance and normal operation.
Need further assitance?
If the portal does not load, re-check the internet connection, QR scan and 18-digit reference number. If access still fails, contact ECE support and quote the unit’s reference number. You can reach our team on 01634 729 690 or sales@eceuk.com.