Call us on 01634 729 690
How to remove and refit a Cooling Coil Removable Drain Tray
Before You Begin
- Select Maintenance Mode and allow the fans to stop fully.
- Isolate the fan system electrically and apply lock-off/tag-out if required.
- Have absorbent materials ready for residual condensate.
- Confirm the tray and cooling coil area are accessible before disconnecting drainage.
Quick Overview
- Isolate the unit and access the cooling coil section safely.
- Disconnect the drain and remove any internal retaining panel.
- Withdraw, inspect and clean the removable tray.
- Refit the tray, reconnect the drain and verify operation after restart.
Keep This Guide On Hand
This guide explains the safe removal, cleaning, inspection and refitting of the stainless-steel removable drain tray beneath the cooling coil section. It is intended to help maintain correct drainage, hygiene performance and leak-free operation.
Video guide | 7 minutes 22 Seconds | Booklet included
Written Guide Overview
This written summary mirrors the booklet and gives users a quick reference to the key steps show in the video.
|
1
|
Isolate the unit, open the cooling coil section, and disconnect the drain connection while controlling any residual condensate. |
|
2
|
Remove the internal retaining panel if fitted, then withdraw the drain tray evenly along its guide rails. |
|
3
|
Inspect and clean the tray, clear the outlet, and check surrounding components and seals before refitting. |
|
4
|
Reinstall the tray and panel, reconnect the drain, close the unit, restart the system, and verify free condensate flow with no leaks or carryover. |
What this guide covers
- Maintenance Mode and electrical isolation.
- Accessing the cooling coil section.
- Disconnecting the drain connection safely.
- Removing the tray and any internal panel.
- Inspection, cleaning and drain outlet checks.
- Refit, restart and post-restart drainage verification.
Need further assitance?
If the portal does not load, re-check the internet connection, QR scan and 18-digit reference number. If access still fails, contact ECE support and quote the unit’s reference number. You can reach our team on 01634 729 690 or sales@eceuk.com.