01634 729 690
sales@eceuk.com
CONTACT

How to remove and refit a Cooling Coil Removable Drain Tray

Call us on 01634 729 690

Before You Begin
  • Select Maintenance Mode and allow the fans to stop fully.
  • Isolate the fan system electrically and apply lock-off/tag-out if required.
  • Have absorbent materials ready for residual condensate.
  • Confirm the tray and cooling coil area are accessible before disconnecting drainage.
Quick Overview
  • Isolate the unit and access the cooling coil section safely.
  • Disconnect the drain and remove any internal retaining panel.
  • Withdraw, inspect and clean the removable tray.
  • Refit the tray, reconnect the drain and verify operation after restart.
Keep This Guide On Hand

This guide explains the safe removal, cleaning, inspection and refitting of the stainless-steel removable drain tray beneath the cooling coil section. It is intended to help maintain correct drainage, hygiene performance and leak-free operation.

Video guide | 7 minutes 22 Seconds | Booklet included

Download Guide

Written Guide Overview

This written summary mirrors the booklet and gives users a quick reference to the key steps show in the video.

1
 Isolate the unit, open the cooling coil section, and disconnect the drain connection while controlling any residual condensate.
2
 Remove the internal retaining panel if fitted, then withdraw the drain tray evenly along its guide rails.
3
 Inspect and clean the tray, clear the outlet, and check surrounding components and seals before refitting.
4
 Reinstall the tray and panel, reconnect the drain, close the unit, restart the system, and verify free condensate flow with no leaks or carryover.
What this guide covers
  • Maintenance Mode and electrical isolation.
  • Accessing the cooling coil section.
  • Disconnecting the drain connection safely.
  • Removing the tray and any internal panel.
  • Inspection, cleaning and drain outlet checks.
  • Refit, restart and post-restart drainage verification.

Need further assitance?

If the portal does not load, re-check the internet connection, QR scan and 18-digit reference number. If access still fails, contact ECE support and quote the unit’s reference number. You can reach our team on 01634 729 690 or sales@eceuk.com.

Make a design enquiry