01634 729 690
sales@eceuk.com
CONTACT

How to open Emergency Entrance and Exit

Call us on 01634 729 690

Before You Begin
  • Ensure the service corridor is adequately lit.
  • Confirm the exit route is free from obstructions.
  • Follow site permit and authorisation procedures before entering for maintenance.
  • Do not operate during fire alarm testing or security lockdown unless instructed.
Quick Overview
  • Confirm the route is clear before operating the emergency door.
  • Exit using the push bar from inside the service corridor.
  • Enter using the authorised external access method.
  • Check the door has latched correctly after use.
Keep This Guide On Hand

This guide explains the correct and safe use of the AHU service corridor emergency entrance and exit door. It covers both exiting from inside using the push bar and entering from outside using the authorised locking mechanism.

Video guide | 5 minutes 08 Seconds | Booklet included

Download Guide

Written Guide Overview

This written summary mirrors the booklet and gives users a quick reference to the key steps show in the video.

1
 Approach the emergency door only after confirming the route is clear and the doorway is unobstructed.
2
 To exit from inside, apply steady pressure to the push bar until the latch retracts and the door opens.
3
 To enter from outside, use the authorised lock or access method, control the door as it opens, and close it behind you immediately .
4
 After use, confirm the latch has re-engaged correctly and report any stiffness, misalignment or latch failure to maintenance.
What this guide covers
  • Safety requirements before operation.
  • Internal push bar exit procedure.
  • External entry procedure and access authorisation.
  • Latch and locking mechanism behaviour.
  • Inspection and routine operational checks.
  • Fault conditions and compliance requirements.

Need further assitance?

If the portal does not load, re-check the internet connection, QR scan and 18-digit reference number. If access still fails, contact ECE support and quote the unit’s reference number. You can reach our team on 01634 729 690 or sales@eceuk.com.

Make a design enquiry